# vi /etc/sysctl.conf
# Kernel sysctl configuration file for Red Hat Linux # # For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and # sysctl.conf(5) for more details. # Disables packet forwarding net.ipv4.ip_forward=0 # Disables IP source routing net.ipv4.conf.all.accept_source_route = 0 net.ipv4.conf.lo.accept_source_route = 0 net.ipv4.conf.eth0.accept_source_route = 0 net.ipv4.conf.default.accept_source_route = 0 # Enable IP spoofing protection, turn on source route verification net.ipv4.conf.all.rp_filter = 1 net.ipv4.conf.lo.rp_filter = 1 net.ipv4.conf.eth0.rp_filter = 1 net.ipv4.conf.default.rp_filter = 1 # Disable ICMP Redirect Acceptance net.ipv4.conf.all.accept_redirects = 0 net.ipv4.conf.lo.accept_redirects = 0 net.ipv4.conf.eth0.accept_redirects = 0 net.ipv4.conf.default.accept_redirects = 0 # Enable Log Spoofed Packets, Source Routed Packets, Redirect Packets net.ipv4.conf.all.log_martians = 0 net.ipv4.conf.lo.log_martians = 0 net.ipv4.conf.eth0.log_martians = 0 # Disables IP source routing net.ipv4.conf.all.accept_source_route = 0 net.ipv4.conf.lo.accept_source_route = 0 net.ipv4.conf.eth0.accept_source_route = 0 net.ipv4.conf.default.accept_source_route = 0 # Enable IP spoofing protection, turn on source route verification net.ipv4.conf.all.rp_filter = 1 net.ipv4.conf.lo.rp_filter = 1 net.ipv4.conf.eth0.rp_filter = 1 net.ipv4.conf.default.rp_filter = 1 # Disable ICMP Redirect Acceptance net.ipv4.conf.all.accept_redirects = 0 net.ipv4.conf.lo.accept_redirects = 0 net.ipv4.conf.eth0.accept_redirects = 0 net.ipv4.conf.default.accept_redirects = 0 # Disables the magic-sysrq key kernel.sysrq = 0 # Decrease the time default value for tcp_fin_timeout connection net.ipv4.tcp_fin_timeout = 15 # Decrease the time default value for tcp_keepalive_time connection net.ipv4.tcp_keepalive_time = 1800 # Turn off the tcp_window_scaling net.ipv4.tcp_window_scaling = 0 # Turn off the tcp_sack net.ipv4.tcp_sack = 0 # Turn off the tcp_timestamps net.ipv4.tcp_timestamps = 0 # Enable TCP SYN Cookie Protection net.ipv4.tcp_syncookies = 1 # Enable ignoring broadcasts request net.ipv4.icmp_echo_ignore_broadcasts = 1 # Enable bad error message Protection net.ipv4.icmp_ignore_bogus_error_responses = 1 # Log Spoofed Packets, Source Routed Packets, Redirect Packets net.ipv4.conf.all.log_martians = 1 # Increases the size of the socket queue (effectively, q0). net.ipv4.tcp_max_syn_backlog = 1024 # Increase the tcp-time-wait buckets pool size net.ipv4.tcp_max_tw_buckets = 1440000 # Allowed local port range net.ipv4.ip_local_port_range = 16384 65536
For changes to take affect right away
# /sbin/sysctl -p